Programmable Digital LCD Timer Relay Switch - 24V DC 16A SPST CN101A for Home Automation & Industrial Control

How to use P setup (configuration), D+ Day (day), H+ hour (hour), M+ minute (minute), clock, C reset (reset), manual (manual), C/R (recovery/cancel) 1. Set the current time Press clock at the same time to press M+, H+ and D+ to set the current time. 2. Setup time for opening and closing Press P, the LCD shows "1 ON" word (start of the first start), then press M +, H + and D+ to set the start time. Press P again, the LCD will display the word "1 OFF" (set the first time end), and then press M+, H+ and D+ to set the time until the end. In this way, you can set a total of 17 times on / off. 3. If you only set once, you need to press C/R to break off another 16 times. How to use P setup (configuration), D+ Day (day), H+ hour (hour), M+ minute (minute), clock, C reset (reset), manual (manual), C/R (recovery/cancel) 1. Set the current time Press clock at the same time to press M+, H+ and D+ to set the current time. 2. Setup time for opening and closing Press P, the LCD shows "1 ON" word (start of the first start), then press M +, H + and D+ to set the start time. Press P again, the LCD will display the word "1 OFF" (set the first time end), and then press M+, H+ and D+ to set the time until the end. In this way, you can set a total of 17 times on / off. 3. If you only set once, you need to press C/R to break off another 16 times.