Akozon 555 Timer Relay - DC 24V Delay On/Off Time Switch with Self-Locking Function | Perfect for Industrial Automation, Home Appliances & DIY Electronics Projects
Free shipping on all orders over $50
7-15 days international
28 people viewing this product right now!
30-day free returns
Secure checkout
59371506
Description
Specification:Working voltage: DC 5V, 12V, 24V (Optional)Working current:<80mA at 5V (<1mA when the relay is not operating)<35mA at 12V <1mA when the relay is not operating)<18mA at 24V (<1mA when the relay is not operating)Load capacity:-normally open port: DC 0-30V/10A, AC 0-250V/10A-normally closed port: DC 0-28V/10A, AC 0-125V/10AWorking temperature: -20~60℃ (limit range -30~70℃)Size: 60*35*20mm / 2.36*1.38*0.79inPackage weight: Approx. 23gPackage list:1 * Delay Timer Relay
Features
【Application】The Delay Relay Module could be widely used in a variety of control situations that require delay self-locking. The module is preset with 4 functions to meet a variety of application needs, and can customize and add other specific functions as user needs.
【Module Function】The user can select one of the following four functions by pressing the button. The delay time can be selected by adjusting the potentiometer. The delay time T1 can be adjusted between 0.1 second and 120 seconds.
【Power-on Delay Pull-in】After the delay of T1 from the start of power-on, the relay pulls in and sends a high-level pulse signal to the X1 interface at any time. This function resets and restarts. THE POWER-ON DELAY IS DISCONNECTED: the relay is closed when the power is turned on. After the T1 time is closed, the relay is disconnected, and a high-level pulse signal is given to the X1 interface at any time. This function is reset and restarts.
【Self-locking Relay Mode】Self-locking relay mode: a high-level pulse signal is sent to the relay X1 interface, the relay is closed, and a high-level pulse signal relay is turned off.
【Level Trigger Mode】Level trigger mode: When the power is turned on, the relay is disconnected, and a high level signal is sent to the X1 interface. The relay immediately picks up. After the X1 port signal disappears, the relay still pulls in. When the pull-in time T1 arrives, the relay turns off.
