PRO Timer 3 Camera Intervalometer for DSLR - Wireless Remote Control for Time Lapse, Long Exposure & Night Sky Photography - Perfect for Landscape, Astrophotography & Creative Shooting

The best interval trigger for time lapse and astro The LRTimelapse PRO Timer 3 is one of the most advanced and flexible camera interval triggers for time-lapse and astro photographers. Small and lightweight with a built-in Li-ion battery, the timer can be charged via Micro-USB and lasts up to 20 hours per battery charge! It features a crisp OLED display that is readable in all conditions and a single button for extra easy and ergonomic operation - even in the dark and with gloves on. Small, lightweight and enormously flexible The LRT PRO Timer's small and lightweight housing can be attached directly to the camera's hot shoe (or via corresponding eyelets on the tripod) at two different angles! The timer can trigger two cameras at the same time, supports mirrorless cameras and offers a flashlight function for foreground lighting - it also allows timed and periodic shooting, and most importantly: the shortest possible black times. So the camera can be operated without any problems while shooting! Flexible settings and different modes Intervals can be set in 0.1 second increments. Interval ramping allows stepless interval adjustment over an adjustable time period during shooting - even in combination with motion control hardware! Optional Bulb mode (astrophotography) is available for time-lapse and single exposures. The timer illumination can be switched off! Default values for interval, number of exposures, etc. can be saved in the LRT PRO timer settings. Even more features compared to the predecessor Compared to its predecessor, the LRT PRO Timer 3 offers double the resolution and almost triple the display size, a display cover made of precision optical glass, an aluminum knob for more precise settings and haptic indicators for the camera connection numbers on the housing! The timer works with any camera for which there is a standard release cable (DSLR/DSLM, Nikon, Canon, Sony, Fuji, Olympus, Leica and many more). The release cable for the respective camera is not included! Features Real-time clock (battery operated with CR1220 coin cell).2 camera connections with three-pin 2.5 mm jack sockets2 flash shoes on the housing at different angles (camera attachment)2 eyelets on the housing for passing a cord or Velcro strap (tripod attachment)Tested temperature range: -20 to +40 °C (Please do not leave the timer in a car exposed to direct sunlight. It is best to store the timer in a backpack in very cold conditions to protect the battery).Bulb time for single exposure up to 24 hrs.Operating time with fully charged battery is approx. 20 hrs, or approx. 20,000 exposures (interval: 4 sec, display on)Firmware updates are possible via UF2 files. Simply copy the firmware file to the drive provided after connecting the timer to a computer (PC or Mac). The timer must be put into update mode by double-clicking the reset button.Although the optical glass cover of the LRT PRO Timer 3.0 provides good protection, the device is not waterproof. Please do not operate in rain or expose the device directly to water. Features Real-time clock (battery operated with CR1220 coin cell).2 camera connections with three-pin 2.5 mm jack sockets2 flash shoes on the housing at different angles (camera attachment)2 eyelets on the housing for passing a cord or Velcro strap (tripod attachment)Tested temperature range: -20 to +40 °C (Please do not leave the timer in a car exposed to direct sunlight. It is best to store the timer in a backpack in very cold conditions to protect the battery).Bulb time for single exposure up to 24 hrs.Operating time with fully charged battery is approx. 20 hrs, or approx. 20,000 exposures (interval: 4 sec, display on)Firmware updates are possible via UF2 files. Simply copy the firmware file to the drive provided after connecting the timer to a computer (PC or Mac). The timer must be put into update mode by double-clicking the reset button.Although the optical glass cover of the LRT PRO Timer 3.0 provides good protection, the device is not waterproof. Please do not operate in rain or expose the device directly to water. Technical data Display: 128 x 64 px OLED (black and white) with precision optical glass coverBattery: via Micro-USB rechargeable 500 mAh LiPo (can be upgraded to 800 mAh)Processor: ATSAMD21 Cortex M0Intervals: 0.3 sec. to 12 hrs.Interval steps: 0.1 sec. (0.01 sec. if required)Number of exposures: 1 to ∞Size (incl. rotator): 83 x 43 x 29 mmWeight (incl. battery): 67 gPackaging size: 135 x 89 x 35 mmWeight incl. packaging: 107 g Technical data Display: 128 x 64 px OLED (black and white) with precision optical glass coverBattery: via Micro-USB rechargeable 500 mAh LiPo (can be upgraded to 800 mAh)Processor: ATSAMD21 Cortex M0Intervals: 0.3 sec. to 12 hrs.Interval steps: 0.1 sec. (0.01 sec. if required)Number of exposures: 1 to ∞Size (incl. rotator): 83 x 43 x 29 mmWeight (incl. battery): 67 gPackaging size: 135 x 89 x 35 mmWeight incl. packaging: 107 g